# Quickgui


## Quickgui: Veritas A
```{figure} img/quickgui_a.png
---
class: with-border
---
```
**How to start it:**
* Icon on desktop
* Run in terminal: "quickgui /mxn/home/veritas-user/quickgui/veritas_a.yml"

**What does it do?**

This is a general interface for moving motors in the beamline.

**When do I need to use it**

This is typically used for beamline optimization.

## Quickgui: Veritas B
```{figure} img/quickgui_b.png
---
class: with-border
---
```
**How to start it:**
* Icon on desktop
* Run in terminal: "quickgui /mxn/home/veritas-user/quickgui/veritas_b.yml"

**What does it do?**

It is used for moving motors on the open-port branch of the beamline.

**When do I need to use it?**

You will use this if you are a user at the B-branch. Beamline optimization, set monochromator exit slits and beamline energy.

## Quickgui: Veritas A endstation
```{figure} img/quickgui_ea.png
---
class: with-border
---
```
**How to start it:**
* Icon on desktop
* Run in terminal: "quickgui /mxn/home/veritas-user/quickgui/endstation_a.yml"

**What does it do?**

This is a general interface for moving motors needed to operate the big spectrometer.

**When do I need to use it?**

* [Sample transfer](../Guides/index.md)
* Moving and rotating the sample
* Changing beamline energy, monochromator exit slit
* Changing Q-angle of the spectrometer
* Changing energy of the spectrometer.